Preparing the Samsung TV for development

The TV under test must switch to the development mode for installing the Dolby test application.

Procedure

  1. Update the TV firmware to the latest version (later than 1400.0).
  2. Set the TV to Developer Mode.
    1. Switch on the TV, and press the Smart Hub button on the remote control.
    2. Enter the Apps screen.
    3. In the Apps screen, press the number buttons 1, 2, 3, 4, 5 in sequence on the remote control.

      An interface appears for setting Developer Mode.

    4. Set the Developer Mode to On.
    5. Enter the IP address for the PC that will be connected to this TV.
    6. Reboot the TV.
      It might be necessary to disconnect the TV power plug to make the settings effective.
      If the TV is successfully set to the development mode, a red sign reading Developer Mode will appear on the Apps screen after rebooting.
    For detailed information, see http://www.samsungdforum.com/TizenGuide.
  3. Verify the IP address for the TV, and make sure the TV and the PC are connected to the same network (same router).
    The Samsung system development kit will be installed on the PC for deployment of the test application.