The HbbTV 2.0 product must be able to access the DISC website and the test
signals.
The test application must be successfully loaded to the
HbbTV product.
Procedure
Load the test application.
The application GUI appears.
Navigate to and highlight the test signal you want
to play in the test stream list panel by using the arrow keys on the remote
control:
By default, all available test signals are listed by
the test application. you must select those required ones to play by
referencing the resulting page that contains the test-case list
generated by the Playback
Kit Interactive Test Procedure.
Information about the underscored test signal is
displayed in the display area.
You can return to the parent level playlist by
pressing the Return key on the remote control.
Play a highlighted test signal by pressing the
Ok key on the
remote control:
If playback of a test signal is successful, the
Debug
panel displays Connecting...>Buffering...>Playing..., and the
video plays back in the window in correct alignment with the audio.
If playback of a test signal fails, the Debug panel displays
error messages.
library_booksNote: Adverse behaviors during
playback (such as audible pops, clicks, or muting) cannot be
detected by the test application, and no error indication will
display.